Introduction
The 2016 Jeep Cherokee is a reliable and popular SUV, known for its off-road capabilities and sleek design. Like any modern vehicle, it comes equipped with keyless entry and ignition, which relies on a key fob. The key fob allows you to unlock and start your Jeep Cherokee with ease. However, over time, the battery in the key fob may need to be replaced. In this article, we will guide you through the process of replacing the key fob battery in your 2016 Jeep Cherokee.
Step 1: Purchase the Correct Battery
The first step in replacing the key fob battery is to purchase the correct replacement battery. The 2016 Jeep Cherokee key fob uses a CR2032 battery, which is easily available at most electronic stores or online retailers. Ensure that you buy a high-quality battery to ensure optimal performance.
Step 2: Locate the Battery Compartment
Next, locate the battery compartment on your key fob. On the back of the key fob, you will find a small indentation or a groove. Gently insert a small flathead screwdriver or a coin into the groove and twist it to separate the key fob’s halves.
Step 3: Remove the Old Battery
Once the key fob is open, you will see the old battery. Carefully remove it by pushing it out from the slot with a small flathead screwdriver or your finger. Be cautious not to damage or scratch the circuit board inside.
Step 4: Insert the New Battery
Take the new CR2032 battery and insert it into the slot, ensuring that the positive side is facing up. Gently press it down until it fits securely in place. Ensure that the battery is properly aligned with the contacts on the circuit board.
Step 5: Reassemble the Key Fob
Once the new battery is inserted, carefully reassemble the key fob by aligning the two halves and pressing them together. You should hear a click sound when the key fob is securely closed. Avoid using excessive force to avoid damaging the key fob.
Step 6: Test the Key Fob
Now that the key fob is reassembled, it’s time to test it. Stand near your Jeep Cherokee and press any button on the key fob to ensure that it works properly. If the key fob doesn’t work, double-check the battery’s alignment and try again. If the issue persists, consider replacing the battery with a new one.
Tips and Precautions
When replacing the key fob battery in your 2016 Jeep Cherokee, keep the following tips and precautions in mind:
Tip 1: Use a high-quality battery.
Investing in a high-quality battery will ensure better performance and longevity.
Tip 2: Take care while opening the key fob.
Use a gentle hand while opening the key fob to avoid damaging the internal components.
Tip 3: Check the battery’s alignment.
Ensure that the new battery is properly aligned with the contacts on the circuit board to avoid any connectivity issues.
Precaution 1: Avoid excessive force.
Do not apply excessive force while reassembling the key fob as it may lead to damage.
Precaution 2: Dispose of old batteries properly.
Dispose of the old key fob battery in an environmentally friendly manner. Do not throw it in the regular trash.
Conclusion
Replacing the key fob battery in your 2016 Jeep Cherokee is a simple and straightforward process. By following the steps outlined in this article, you can ensure that your key fob continues to function effectively. Remember to use a high-quality battery, take precautions while handling the key fob, and dispose of old batteries responsibly. With a fresh battery, you can enjoy the convenience and security of keyless entry and ignition in your Jeep Cherokee.