Introduction
The 2020 Hyundai Santa Fe is a popular SUV known for its sleek design and advanced features. One of the key features of this vehicle is its keyless entry system, which uses a key fob to unlock and start the car. Over time, the battery in the key fob may need to be replaced. In this article, we will guide you on how to replace the battery in your 2020 Hyundai Santa Fe key fob.
Step 1: Determine the Battery Type
Before replacing the battery, you need to determine the type of battery used in your key fob. The 2020 Hyundai Santa Fe key fob typically uses a CR2032 battery, but it’s always a good idea to double-check the owner’s manual or contact your local Hyundai dealership to confirm the battery type.
Step 2: Gather the Necessary Tools
To replace the battery, you will need a small Phillips-head screwdriver and a new CR2032 battery. Make sure you have these tools handy before you begin the replacement process.
Step 3: Open the Key Fob
To access the battery, you need to open the key fob. Look for a small slot or indentation on the side of the fob. Insert the screwdriver into the slot and gently pry open the fob. Be careful not to apply too much force to avoid damaging the key fob.
Step 4: Remove the Old Battery
Once the key fob is open, you will see the old battery. Carefully remove the old battery from its compartment. Take note of the battery’s orientation as you will need to insert the new battery in the same way.
Step 5: Insert the New Battery
Take the new CR2032 battery and place it in the battery compartment, making sure it is properly aligned. Gently press the battery down to secure it in place. Ensure that the battery is snugly fitted to prevent any connection issues.
Step 6: Close the Key Fob
With the new battery in place, it’s time to close the key fob. Align the two halves of the fob and carefully snap them back together. Make sure the fob is securely closed to avoid any damage or malfunction.
Step 7: Test the Key Fob
After replacing the battery, it’s important to test the key fob to ensure it is working properly. Stand near your vehicle and press the buttons on the fob to lock and unlock the car. If the key fob functions as expected, you have successfully replaced the battery.
Step 8: Dispose of the Old Battery
Properly dispose of the old battery according to your local regulations. Many electronic stores or recycling centers accept used batteries for safe disposal.
Conclusion
Replacing the battery in your 2020 Hyundai Santa Fe key fob is a simple process that can be done at home. By following these steps, you can ensure that your key fob continues to work smoothly, allowing you to enjoy the convenience of keyless entry and start. Remember to always use the correct battery type and handle the key fob with care to avoid any damage.