Introduction
The 2020 Subaru Crosstrek is a popular compact SUV known for its reliability and off-road capabilities. One important component of the Crosstrek is its key fob, which allows drivers to easily lock, unlock, and start their vehicles. To ensure that your key fob continues to function properly, it’s essential to replace its battery when needed. In this article, we will guide you through the process of replacing the key fob battery in your 2020 Subaru Crosstrek.
Identifying the Type of Key Fob
Before replacing the battery, you need to identify the type of key fob your 2020 Subaru Crosstrek uses. There are two common types: the standard key fob and the proximity key fob. The standard key fob requires physical contact with the vehicle’s door handle to unlock it, while the proximity key fob allows for keyless entry and ignition.
Standard Key Fob Battery Replacement
If your Crosstrek is equipped with the standard key fob, the battery replacement process is relatively straightforward. First, locate the small indentation on the key fob’s side. Insert a small flathead screwdriver or a similar tool into the indentation and gently pry open the key fob. Inside, you will find the battery compartment.
Remove the old battery by carefully sliding it out of the compartment. Take note of the battery’s orientation as you will need to insert the new battery in the same way. Insert the new battery into the compartment, ensuring it is securely in place. Finally, snap the key fob back together by aligning the two halves and pressing them firmly until they click into place.
Proximity Key Fob Battery Replacement
For Crosstreks equipped with the proximity key fob, the battery replacement process is slightly different. Start by removing the emergency key from the key fob by sliding the release latch and pulling it out. Once the emergency key is removed, you will see a small slot on the side of the key fob.
Insert a small flathead screwdriver or a similar tool into the slot and gently pry open the key fob. Inside, you will find the battery compartment. Remove the old battery by sliding it out, and insert the new battery in the same orientation. Close the key fob by aligning the two halves and pressing them together until they click into place. Finally, reinsert the emergency key back into the key fob.
Tips for Battery Replacement
When replacing the key fob battery, there are a few tips to keep in mind. Firstly, ensure that you are using the correct type of battery for your specific key fob model. Consult your vehicle’s owner’s manual or contact a Subaru dealer to determine the appropriate battery size and type.
Additionally, it’s recommended to replace the battery as soon as you notice a decrease in range or responsiveness of the key fob. This will prevent any inconvenience or potential lockouts due to a completely drained battery.
Conclusion
Replacing the key fob battery in your 2020 Subaru Crosstrek is a simple process that can be done at home. By following the steps outlined in this guide, you can ensure that your key fob continues to function properly, providing you with convenient access to your vehicle. Remember to use the appropriate battery type and consult your owner’s manual if you have any questions or concerns.