2017 Kia Optima Key Fob Battery Replacement: A Simple Guide

KiaSoulKeyFobBatteryReplacementGuide011
KiaSoulKeyFobBatteryReplacementGuide011 from www.paulstravelpictures.com

Introduction

If you own a 2017 Kia Optima and have been experiencing issues with your key fob, it might be time to replace the battery. A key fob is a convenient tool that allows you to lock, unlock, and start your car with ease. However, like any other battery-powered device, the key fob battery may eventually run out of juice, causing your fob to stop working. In this article, we will guide you through the process of replacing the key fob battery in your 2017 Kia Optima.

Gather the Necessary Tools

Before you start the replacement process, it’s important to gather the necessary tools. You will need a small flathead screwdriver and a replacement battery. For the 2017 Kia Optima key fob, you will require a CR2032 battery, which is readily available at most hardware stores or online retailers.

Step 1: Open the Key Fob

Use the small flathead screwdriver to gently pry open the key fob. Insert the screwdriver into the groove on the side of the fob and carefully twist it to separate the two halves of the fob. Be cautious not to apply too much force, as you don’t want to damage the fob in the process.

Step 2: Remove the Old Battery

Once the key fob is open, you will see the old battery. Carefully remove the battery by using the screwdriver or your fingers. Take note of the battery’s orientation, as you will need to insert the new battery in the same way.

Step 3: Insert the New Battery

Take the new CR2032 battery and align it with the correct polarity, matching the positive (+) and negative (-) symbols on the battery and the fob. Gently place the new battery into the designated slot, ensuring it is securely in place.

Step 4: Reassemble the Key Fob

With the new battery in place, carefully align the two halves of the key fob and press them together until they snap back into place. Ensure that the fob is closed securely and all edges are properly aligned.

Step 5: Test the Key Fob

Once the key fob is reassembled, it’s time to test it. Stand near your car and press the lock and unlock buttons on the fob. If the car responds accordingly, congratulations, you have successfully replaced the key fob battery. If not, double-check the battery’s orientation and try again.

Conclusion

Replacing the key fob battery in your 2017 Kia Optima is a simple and straightforward process. By following the steps outlined in this guide, you can save time and money by replacing the battery yourself. Remember to use the correct battery type and handle the fob with care to avoid any damage. With a fresh battery, your key fob will be ready to serve you reliably once again.