Introduction
If you own a SimpliSafe home security system, it’s important to know how to change the battery in your entry sensor. The entry sensor is a crucial component of the system, as it detects when doors or windows are opened or closed. Over time, the battery in the sensor will need to be replaced to ensure that it continues to function properly. In this article, we will guide you through the process of changing the battery in your SimpliSafe entry sensor.
Step 1: Gather the necessary tools
Before you begin, make sure you have the following tools handy:
- Small flathead screwdriver
- New CR123A battery
Step 2: Prepare for battery replacement
To change the battery in your entry sensor, you’ll need to remove it from the door or window. Start by disarming your SimpliSafe system to prevent any false alarms. Then, locate the entry sensor that needs a battery replacement. It should be attached to the door or window frame using adhesive tape or screws.
Step 3: Open the entry sensor
Using the small flathead screwdriver, gently pry open the entry sensor. Be careful not to apply too much force, as you don’t want to damage the sensor or its components. The sensor should easily pop open, revealing the battery compartment.
Step 4: Remove the old battery
Once the sensor is open, you’ll see the old battery inside the compartment. Carefully remove the old battery and set it aside for proper disposal. Be sure to handle the battery with care, as it may still have some charge left.
Step 5: Insert the new battery
Take the new CR123A battery and insert it into the battery compartment. Make sure the positive (+) and negative (-) ends are properly aligned with the corresponding markings inside the sensor. Push the battery in until it is securely in place.
Step 6: Close the entry sensor
Once the new battery is inserted, gently close the entry sensor. You should hear a click, indicating that it is securely closed. Ensure that the sensor is properly aligned with the door or window frame before moving on to the next step.
Step 7: Test the sensor
Now that the battery has been replaced, it’s important to test the entry sensor to ensure it is functioning correctly. Arm your SimpliSafe system and open the door or window where the sensor is located. The system should detect the opening and trigger the appropriate response, such as sounding the alarm or sending a notification to your smartphone.
Step 8: Reattach the sensor
If the sensor is working properly, reattach it to the door or window frame using the adhesive tape or screws. Make sure it is securely in place to ensure accurate detection of openings and closings.
Step 9: Dispose of the old battery
Properly dispose of the old battery by following your local regulations for battery recycling. Many electronics stores and recycling centers accept used batteries for safe disposal.
Step 10: Regular maintenance
Changing the battery in your entry sensor is just one aspect of maintaining your SimpliSafe system. Regularly check the battery levels of all your sensors and replace them as needed. It’s also a good idea to test your system periodically to ensure all components are working correctly.
By following these steps, you can easily change the battery in your SimpliSafe entry sensor and keep your home security system functioning at its best. Remember to always refer to the manufacturer’s instructions for specific details on battery replacement for your particular model.