Introduction
In this tutorial, we will guide you on how to change the battery in a 2020 Honda key fob. The key fob is an essential component that allows you to unlock and lock your vehicle remotely. Over time, the battery in the key fob may run out of power, and it needs to be replaced. Fortunately, changing the battery is a simple process that can be done at home with minimal effort.
Step 1: Gather the Required Tools
Before you start, make sure you have the necessary tools. You will need a small flathead screwdriver or a plastic pry tool and a replacement battery. The replacement battery required for the 2020 Honda key fob is a CR2032 battery, which can be easily found at most hardware stores or online retailers.
Step 2: Locate the Key Fob Slot
To change the battery, you need to locate the key fob slot. On the 2020 Honda models, the key fob slot is usually located on the side of the key fob. Look for a small indentation or a groove that indicates the slot’s position.
Step 3: Open the Key Fob
Using the small flathead screwdriver or plastic pry tool, gently insert it into the slot and apply slight pressure to open the key fob. Be careful not to use excessive force to avoid damaging the key fob or the slot. Once the key fob is open, you will see the battery compartment.
Step 4: Remove the Old Battery
Now that the key fob is open, carefully remove the old battery from the compartment. Take note of the battery’s orientation before removing it, as you will need to place the new battery in the same position.
Step 5: Insert the New Battery
Take the new CR2032 battery and insert it into the battery compartment, making sure it is oriented correctly. The positive side of the battery should be facing up. Gently press the battery down to ensure it is securely in place.
Step 6: Close the Key Fob
Once the new battery is inserted, carefully close the key fob by aligning the two halves and applying gentle pressure. You should hear a click when the key fob is securely closed.
Step 7: Test the Key Fob
Now that you have replaced the battery, it’s time to test the key fob. Stand near your vehicle and press any button on the key fob to ensure it is working correctly. If the vehicle responds to the key fob commands, then the battery replacement was successful.
Step 8: Dispose of the Old Battery Properly
Remember to dispose of the old battery properly. Do not throw it in the regular trash as it contains hazardous materials. Look for a recycling center or a local battery disposal drop-off point to safely dispose of the old battery.
Conclusion
Changing the battery in your 2020 Honda key fob is a simple task that you can easily do at home. With the right tools and a replacement battery, you can have your key fob working like new again in no time. By following the step-by-step guide outlined in this tutorial, you can save time and money by avoiding a trip to the dealership. Remember to dispose of the old battery responsibly and enjoy the convenience of your fully functional key fob.